Swim'n Play ABOVE GROUND SWIMMING POOL User Manual download pdf (Page 18)

VERTICALS, TOP PLATES AND RAILS

PRE-ASSEMBLY OF TOP PLATES*

No. 12 x 1/2”

Sheet Metal

Screw

If fencing or decking is to be installed, refer to the deck and fence instructions before

installing verticals. The holes indented in the face of the verticals must be on top.

If your pool is equipped with feature tape, it is best to apply it to the verticals at this time.

VERTICAL

BUTTRESS

* NOTE: CAGE NUTS NOT NEEDED ON ALL POOLS - CHECK YOUR PACKING LIST

Before the top plates are installed it is necessary

to attach the cage nuts* in their appropriate

locations as shown in the figures at right.

Using a pliers, squeeze together the spring

sides of the cage

nuts and insert them

into the top

plate from

underneath.

CAGE NUT

TOP PLATE

PLIERS

TOP PLATE

CAGE NUT

TOP PLATE WITH CAGE NUT

1/4” CAGE NUT

Attention:

If your pool

has the 2 piece

resin vertical,

insert the flat

piece into the

vertical before

installation, as

shown.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

No comments

Swim'n Play ABOVE GROUND SWIMMING POOL User Manual Page 18